 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Full Color Top View LEDs 67-03/S3GHBHC-B01/1T Features P-LCC-4 package. White package and black surface. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain with RoHS compliant version Descriptions The 67-03 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Lens Color Type S3 GH BH Material AlGaInP InGaN/SiC InGaN/SiC Emitted Color Reddish Orange Brilliant Green Blue Water Clear Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 1 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Package Outline Dimensions C L 3 0.70.1 2.20.1 2.80.2 3 C L 4 1 3.20.2 0.50.1 3.50.2 2.40.1 2 2 4 1 2.80.2 0.150.05 0.80.1 1.90.2 2.70.2 For reflow soldering(propose) 0.80.1 1.8 1.6 1.8 Notes: 1.All dimensions are in millimeters 2.Tolerances Unless Dimension = 0.1mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 0.7 Rev. 2 Page: 2 of 13 Prepared by: Josh Chou 2.2 EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Symbol VR S3 Forward Current IF GH BH S3 Peak Forward Current(Duty 1/10 @ 1KHz) IFP GH BH S3 Power Dissipation Pd GH BH S3 Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature ESD GH BH Topr Tstg Tsol Rating 5 50 30 30 100 100 100 120 110 110 2000 1000 1000 -40 ~ +85 -40~ +90 V mW mA mA Unit V Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 3 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. 180 225 72 ------------613.5 520.0 465.0 ----------------------------------------Typ. ------------615 518 468 ------------20 30 26 2.0 3.5 3.5 120 ------------Max. 360 450 180 ------------621.5 525.0 470.0 ------------2.4 3.9 3.9 ----10 50 50 A VR=5V deg IF=20mA V IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA mcd IF=20mA Unit Condition Luminous Intensity IV Peak Wavelength p Dominant Wavelength d Spectrum Radiation Bandwidth Forward Voltage VF S3 GH BH S3 GH BH S3 GH BH S3 GH BH S3 GH BH Viewing Angle 21/2 Reverse Current IR S3 GH BH Note: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1 nm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 4 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Bin Range Of Luminous Intensity Symbol Bin Code S1 S3 S2 T1 Min. 180 225 285 225 285 360 72 90 112 140 Max. 225 285 360 285 360 450 90 112 140 180 mcd IF =20mA Unit Condition GH IV S2 T1 T2 Q1 Q2 BH R1 R2 Bin Range Of Dominant Wavelength Symbol S3 d Bin Code E3 E4 G B Min. Max. Unit Condition GH BH Note: 613.5 617.5 520 465 617.5 621.5 525 470 mcd IF =20mA 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1 nm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 5 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Typical Electro-Optical Characteristics Curves(S3) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 6 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Typical Electro-Optical Characteristics Curves(BH) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 7 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Typical Electro-Optical Characteristics Curves(GH) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 8 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 9 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel. Note: Tolerances Unless Dimension 0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 10 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 11 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 12 of 13 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-03/S3GHBHC-B01/1T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date: 05-Dec-2006 Rev. 2 Page: 13 of 13 Prepared by: Josh Chou |
Price & Availability of 67-03-S3GHBHC-B01-1T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |